Home | WRX/STi/XT/GT/Baja Turbo | Impreza 2.5 | Legacy/Forester/Baja | Specials | Gallery | Contact Us | Order Form

WRX / STi / XT / Baja Turbo / Legacy GT

If you don't see it, please contact us!

All images May Not be Vehicle Specific. For Display Purposes Only.








SM GReddy

60mm Gauges


Straight from our Japanese Domestic Market is our SMI line of linkable meters. The GReddy SM Intergate (Stepping Motor Drive Integrate) metric gauges connect upto 6 SMI meters (Turbo, Exhaust Gas Temp, Oil Pressure, Water Temp, Fuel Pressure, & Oil Temp.) with the GReddy Control Unit. The simplified wiring with the SMI has never been easier. The Control Unit allows for easy usage of Warning and Peak Hold Functions. The unit can also record upto 40sec. of data with the built-in memory. Plus the is the stylish interactive start-up display on the classic easy to read GReddy gauge face.

SM Integrate Control Unit (required to operate gauges) $190.00

Boost Gauge $290.00

EGT Gauge $320.00

Water Temp Gauge $240.00

Fuel Pressure Gauge $320.00

Oil Pressure Gauge $320.00

Oil Temp Gauge $240.00




AEM Air/Fuel Gauge Type UEGO Controller

Single Channel UEGO GAUGE - Black Bezel Black Face


A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-channel wideband UEGO controller and gauge display into one unit, uniting unsurpassed AFR accuracy and control with an easy-to-read interface. AEM’s Gauge-Type Wideband UEGO Controller features a digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean. The unit’s 52mm (2-1/16”) gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere.

Key Features:

- Color-coded LED Display lights provide immediate reference to engine's air/fuel ratio (AFR) or Lambda (11.0:1 to 17.0:1)
- Integrated three-digit display reveals AFR or Lambda in real time (10.0:1 to 18.5:1)
- User-selectable 0-5v analog output included for use with data loggers and most programmable engine management systems
- Switch between AFR or Lambda readout with a twist of a switch (included face plate change is required for proper readout)
- Quick-Connect system eases installation by allowing users to mount the gauge and sensor wiring separately
- Ideal AFR monitoring tool for carbureted applications and engine dynamometers
- Does not oscillate AFR like narrow band sensors
- Serial data stream included for output of AFR (RS 232)
- Accurate to 0.1 AFR
- Bosch UEGO sensor included

Picture is for representation only. Actual product may vary.


AEM 52mm Digital Display Gauges

AEM's digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauges, it's like having four gauge designs in one!

Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.


- Includes easy-to-install harness and sensor (voltmeter does not include sensors)
- Complete stand alone gauge requires no additional sensors or programs to operate
- Ideal for both fuel injected and carbureted motors
- LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
- Includes 0-5V analog output for routing to engine management system or data logger
- Easy to read faceplates/displays are designed to complement existing AEM gauge styles
- Included bezels and face plates allow you to personalize the look of your gauge

Boost: Displays boost &

vacuum -30-+50 psi.


Boost: Displays boost

-30-+35 psi






Black/White Face Exhaust Gas Temp




Oil Pressure: Displays Oil

Pressure 0-150 psi


Univ. Pressure: Fuel or Oil.

Meters 0-100psi



Temperature: used for

transmission, water, or oil


Voltmeter: 8-18V


ApexI AVC-R Boost Controller

ApexI Boost Control
Advanced electronic boost controller

Highly flexible boost control with revolutionary new functions; Vacuum Fluorescent Display (VFD).

The Super AVC-R is the premium closed-loop electronic boost controller on the market. The AVC-R allows flexible control over virtually every aspect of boost control and adds new innovative functions such as injector pulse monitoring and gear specific boost control. Some key functions include: RPM-based boost and solenoid duty cycle control, scramble boost, self learning mode, 2D ghost map trace mode, analog display mode, real time replay and peak hold data modes. The AVC-R utilizes an ultra-fast microprocessor and a high quality solenoid valve to control boost. The result is ultra-fast response and accurate, stable boost control.

Super AVC-R $700.00

Install instructions

STi SP intercooler Temp Gauge

SP intercooler temp gauge is a perfect meter to monitor your temperature coming from your intercooler. It measures in Fahrenheit the temperature coming in, the temperature coming out, and tells you the difference. Includes 2 probes for easy install.

SP Intercooler Temp Gauge $359.99

Agency Power Aluminum Shift Knob for Subaru 5Speed WRX 02+ and 6Speed Subaru STI 04+


Get your shifts perfect with the all new Agency Power aluminum shift knob for the 5speed Subaru WRX and 6speed Subaru STi cars. This 6061 aluminum shift knob has a perfect fit to your hand and a good weight to throw the gears fast. Each shift knob comes with a laser engraved Agency Power logo. Shift knobs are available in Blue, Red, Black, or Polished. These shift knobs will fit on your factory WRX shifter, most WRX aftermarket kits, designed to work with the factory reverse mechanism on the STi and of course the Agency Power Short Shift Kit.



ATI Center Pod


STi/WRX 2002-2011


STi/WRX 2002-2007

Each gauge slot has a "punch out" design that allows you to increase the diameter to accommodate a standard 52mm or a 60mm opening. Each Subaru Pod comes with 3 ATI holding rings to ensure the gauges hold tightly. There are also optional face plates to customize the look of your Subi.


STi/WRX 2011

The EZ-Pod is the perfect solution for mounting aftermarket gauges in your 2011 Subaru WRX. This unit mounts to the center dashboard for easy viewing, and adds a performance aesthetic to your Subaru that you are sure to get compliments on. The EZ-Pod fits both 52mm and 60mm gauges. The included gauge adapters even allow you to mix and match your 52mm or 60mm gauges in the same pod, a feature that many of the other brands overlook. The pod also includes instructions and hardware for easy installation. The gauge hood mounts with included double sided tape and two screws should you wish to use them.

Subaru Impreza WRX/STi /chrome or blue face Pod
Universal 52mm/60mm $240.00

Subaru Impreza WRX/Sti w/carbon face Pod
Universal 52mm/60mm $246.00

Optional Face Plates

Subaru WRX/STi Pod Face Plate - Carbon Fiber look $25.00

Subaru WRX/STi Pod Face Plate - Chrome $21.00

Subaru WRX/STi Pod Face Plate - STi Blue $21.00



Universal Dash Gauge Pods

with Imitation Carbon Fiber

(front, sides and back )

Dual Universal Dash Gauge Pod - 2 1/16" Carbon Fiber.

Comes in double dash pod, and is removable. Sturdy velcro holds this dash pod in place, which makes for easy removal when security is a issue. This unit fits almost any car!

Dual Universal Dash Gauge Pod - 2 1/16" Imitation Carbon Fiber - $120.00

Triple Universal Dash Gauge Pod - 2 1/16" Carbon Fiber.

Comes in triple dash pod, and is removable. Sturdy velcro holds this dash pod in place, which makes for easy removal when security is a issue. This unit fits almost any car!

Triple Universal Dash Gauge Pod - 2 1/16" Imitation Carbon Fiber - $140.00

Triple Universal Dash Gauge Pod mounted in Baja Turbo

Triple APillar pod for the Subaru WRX.

This pod is a full replacement and fits 52mm gauges only.


52mm gauges, must be hollowed out for 60mm

OEM Center Pod


OEM Subaru Pod. Easy to mount. Fits 52mm gauges OK. No faceplate included, open ended.








11-13 Subaru WRX/STi ATI Cluster Bezel Pod


ATI dual gauge pod cluster bezel for the WRX is a direct fit for the factory dashboard. It comes pre-textured to match the dash straight from the factory. This gauge bezel will blend right in and also giving you the option of having two 52mm gauges, this option is perfect for a tuner looking to keep a sleek factory look.


GReddy Gauge Strap

Fitting Band Holder for 52mm or 60mm Gauge (Mount & Clamp) Can be place anywhere, dash, steering wheel column or Apillar.





Team Tech 4 Point Racing Harness

Team Tech Harness are a 3" width belt with a rotating buckle release. The Harness' are a clip in design. They are available in several colors and are great for auto cross, drag racing, and even the serious road racer. Harness' are sold per side.

Available colors are: red, blue, black, yellow, pink, gray, purple and green

$260.00 each

Speedware Steel Harness Bar SUBARU WRX/STI

Speedware Steel Harness Bar mounts behind the front seats. Includes a bracket for a fire extinguisher. We strongly recommend this harness bar to anyone track racing or autocrossing as it provides a safety feature as well as stiffens up the chassis of your vehicle. Keeps room for the rear seat passengers for daily driving. All steel, powder coated gray and includes the hardware for mounting.

Speedware Steel Harness Bar SUBARU WRX/STI w/EXT Mount $550.00

Speedware Steel Harness Bar SUBARU WRX/STI w/o EXT Mount $480.00


Cusco 6 and 7 Point

Rollcages for the


Cusco's bar layout is designed from their extensive experience, with the bar's rigidity seen in the interior from their racing feedback. Bar structures based on feedback from the track that looks good as well as being effective. Note: roll cage interfers with sun visor use.

*40mm chrome molybdenum pipes used 33% percent lighter that a similar steel roll bar.
*Lightweight joints used Increased safety with competition roll bar layout.
*Mounted such to increase body rigidity.

This is the Rollcage for guys who don't want to weld, bolt together construction.