WRX Performance Stage5 Kit 'With Cats'
(Approximately 400 T.Q.) Please note, all power outputs stated are only approximations, for reference purposes and will vary depending on each vehicle, its condition, fuel and modifications.

Kit Contains:

1. AccessPort ECU Upgrade: The Accessport is a mult-featured ECU reprogramming device for your Subaru WRX or STi. The Accessport comes loaded with multiple maps for various setups (i.e. stock, turboback exhaust, etc.). It also allows for custom tuning through Tuners or self-tuning by downloading Cobb's Racer Tuner program. Your Subaru can easily be returned to stock at any time, as the Accessport retains your stock base map. In addition, the Accesport functions as a scan tool, diagnosing and clearing check engine lights (CELs) and other vehicle parameters. The Accessport's color display allows the user to display a variety of parameters including dynamometer testing and real time data.
2. Short Ram Intake: Using the same design feature of the velocity stack found on the inlet to the MAF sensor in the factory box this cast aluminum intake carries the velocity stack radius outward to mate up with a 4.5" high flow cone filter.
3. Blow Off Valve:
4. High Output 255 liter fuel pump
5. Adjustable Fuel Pressure Regulator
6. Parallel Fuel Rails
7. Tumbler Delete: High Horsepower demands a free flowing intake system that is unencumbered by the restrictive stock Tumbler Generating Valves.
8. Custom GT30r (hi-flow) turbocharger
9. STi Fuel Injectors
10. *WRX Stage4 Big Valve DOHC Cylinder Head Package: Custom Stage4 WRX cams with a 0.415 inch lift. Custom Stage4 ported and polished heads. *Requires customer sending their heads to us for modification. Please be patient, each head package is made per order and takes about 8-10 weeks to deliver. Your core charge is refundable if you have returned your OEM heads and cams within 45 days from the date of order delivery, to our designated receiving department and must be received in good, reusable and rebuildable condition, based upon our evaluation. All shipping is the responsibility of the customer. The heads and cams are available on an exchange basis only and is not available for direct sale. Please be patient.
11. Large Front Mount Intercooler - Intercooler kit: Front Mount Intercooler Core, Front Bumper Support Beam. Intercooler Piping Kit, T- bolt Clamps, Radiator Overflow Bottle, and Fuel Line Hose
12. Custom 4 into 1 Stainless Steel Header and Uppipe Combo: Designed to significantly gain horsepower and torque.
13. Xcceleration 3" Turbo-Back Exhaust System with Two Cats and exhaust cutout w/electric switch: Our Turbo-back Exhaust System features the newest technology in Super Hi-Flow Catalytic Converters and Exhaust Piping. Air flow is increased dramatically to greatly increase your HP and Torque. Our System is a constant 3" pipe size, which retains low end torque and produces high air flow capacity. Our Super High Flow cats flow over 502 cfm, increasing exhaust flow which reduces backpressure. Backpressure forces exhaust gases back into the combustion chamber and contaminates the next burn cycle. Reduced backpressure increases exhaust scavenging from the combustion chamber giving you a cleaner, more efficient burn. The increased momentum of the exhaust pulls more air/fuel into the cylinders, hence increasing low end torque.

All power outputs stated are only approximations, for reference purposes only and will vary depending on each vehicle, its condition, fuel, modifications and tuning. All engine modification components, except those that are exempt, have been designed and are intended for off-highway application. These components are for racing vehicles only, which may never be used on public roads and highways. Federal and many state laws prohibit the removal, modification, or rendering inoperable of any device or element of design affecting vehicle emission or safety in a vehicle used on public highways. Violation of such laws may subject the owner or user to a fine or penalty. Installation of this part may void the warranty coverage, if any, on your vehicle. Vehicles modified by the use of performance parts may no longer be lawfully used on public highways. User assumes all cost and risks associated with these items.

Large Front Mount Intercooler		Downpipe & Mid Pipe with Super High Flow Cats		Deep Mellow Cat-Back, 4" Tip
Cutout Intermediate Pipe Hear Mild to Wild				Electric Cutout Valve for Intermediate Pipe
NOTE: Under Federal EPA regulation, replacement of original catalytic converters is allowed only if the original converter(s) is missing, or the vehicle has more than 50,000 miles or is at least five years old and the need for a replacement has been established and documented, or a local inspection program has determined the existing converter is in need of replacement. Please note that no aftermarket catalytic converters are legal for installation in California on OBD II vehicles (some 1994 & 1995, and all 1996 and later vehicles). There is a chance of seeing a CE Light: Inefficient cat code when running less than two cats, so if seen, contact us for the mechanical fix (sold separately). All performance parts have been designed and are intended for off highway application only. Installation of these parts on a vehicle intended for use on public roads may violate state or federal laws and regulations including those relating to emissions requirements and motor vehicle safety standards.