(Approximately
340 H.P.) Please
note, all power outputs stated are only approximations, for
reference purposes and will vary depending on each vehicle,
its condition, fuel and modifications.
Turn
your mild mannered performer into a 'Real
Truck'!
Kit
Contains:
PIGGY-BACK ECU: SMT6 or Delta v2.0 UTEC is ideal for optimizing and fine-tuning performance products such as; Exhaust, Air Intake, Intercoolers, Boost Controllers and Turbo upgrades. All installation and tuning should only be made by a trained technician with proper air/fuel monitoring tools.
Manual
Boost Controller
Short
Ram Intake: Using
the same design feature of the velocity stack found on the inlet
to the MAF sensor in the factory box this cast aluminum intake
carries the velocity stack radius outward to mate up with a 4.5"
high flow cone filter.
Blow
Off Valve:
Hi-Capacity
Top Mount Intercooler
4
into 1 Header and Custom Uppipe Combo: Designed
to significantly gain horsepower and torque.
Xcceleration
Stainless Steel Super Hi-Flow Performance Turboback Exhaust System:
Your car will truly become alive by just replacing
your restrictive Muffler with the newest technology in Super Hi-Flow
Performance Mufflers. Air flow is increased dramatically, which
will greatly increase your HP and Performance. Has a 4" tip
for that great look.
or
Short
Ram
Blow
Off Valve
Hi-Capacity
Top Mount Intercooler
Manual
Boost Contoller
Custom 4 into 1 Stainless Steel Header and Uppipe
Performance
Turboback Exhaust System
NOTE:
Under Federal EPA regulation, replacement of original
catalytic converters is allowed only if the original
converter(s) is missing, or the vehicle has more
than 50,000 miles or is at least five years old
and the need for a replacement has been established
and documented, or a local inspection program has
determined the existing converter is in need of
replacement. Please note that no aftermarket catalytic
converters are legal for installation in California
on OBD II vehicles (some 1994 & 1995, and all
1996 and later vehicles).
There
is a chance of seeing a CE Light: Inefficient cat
code when running less than two cats, so if seen,
contact us for the mechanical fix (sold separately).
All performance parts have been designed and are
intended for off highway application only. Installation
of these parts on a vehicle intended for use on
public roads may violate state or federal laws and
regulations including those relating to emissions
requirements and motor vehicle safety standards.
**Note:
Please
replace the following OEM gaskets when installing the kit:
header, uppipe and turbo gaskets. Xcceleration.com highly
recommends you install a boost gauge, exhaust gas temperature
(EGT) gauge, and
air/fuel
gauge to monitor your car and ensure safe, reliable performance.
Gauges are sold
separately
Baja Turbo Performance
Stage3
Kit 
